Tag Archives: came gimbal

Check out this video that Darryl Smith posted of him using the CAME-Single with a Panasonic and a Panasonic 8mm f/3.5 ED Fisheye lens!

Although, the video is mostly a test on how the Panasonic GH4 looks when the 4K is down converted to 1080, he does use the CAME-Single gimbal the whole time. The CAME-Single is made to hold camera setups that are no more than 2.6lbs(1.2kg). The encoders that are built into the brushless motors allow the gimbal to be extremely stable and use up less battery than needed. The CAME-Single can operate for up to 20 hours when it's fully charged.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Filmmaker, Tom Antos, recently used a Sony A7sii balanced on the CAME-Single gimbal to film this entire music video! The video follows singer, Anna Cyzon as she walks around the streets of New York. The CAME-Single is perfect for a project that requires a lot of tracking shots, especially if it takes place in crowded areas.

The CAME-Single is small enough to be carried around, but is also strong enough to handle a max payload of 2.6lbs. Tom Antos, also posted a quick making of the music video, which he uploaded the same time as the music video was released. It goes through the creative process and even shows why he decided to shoot the entire music video with the CAME-Single. Watch the making  below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Sean J Vincent, recently shared with us a teaser from a web series he worked on that used the CAME-Mini 2 gimbal! He shot it with a Panasonic GH4 and a G Vario 14-42mm lens.

Here's a short synopsis taken from the "Paradox" video description:

Shot at the end of the summer in Norfolk, this web series follows the adventures of a time traveller and the girl who rescues him... Why is he here? Where did the time machine come from? When is he from?
All will be revealed soon...

The web series was shot using a Panasonic GH4 and a Sony FS100. If you want a closer look of Sean J. Vincent's CAME-Mini 2 setup, check out this review on the Mini 2 he posted a few months ago while he was shooting "Paradox".

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release. Also, be sure to check out the first episode of "Paradox" on December 22, 2015.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

 

, posted this quick test video a few days ago of him trying out the Samsung NX-1 camera paired with the CAME-7500 gimbal.

The CAME-7500 is the older version of what is now the CAME-7800 3-axis gimbal. The 7500 gimbal required users to build the gimbal and  required tools to balance the camera on the carriage. Now, most of the gimbals that we offer are tool-less, pre-built and some even have encoders built into the motor (CAME-Single & CAME-Action). The CAME-7800 is a good gimbal for setups that might be too heavy for the CAME-Mini 2 or the CAME-Single. We have a variety of gimbal models that can hold small action cameras(CAME-Action) or bigger setups like a Blackmagic Cinema Camera(CAME-8000).

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

CAME-7800 3 Axis Camera Gimbal

For more information on any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Mini2

Csproductions87, uploaded this wedding he shot using his Panasonic GH4 balanced on a CAME-7500 gimbal with a Rokinon 16mm Cine Lens. The video is a quick highlight video that follows bride and groom as they prepare for the ceremony.

Although, the CAME-7500 gimbal is discontinued, we advise that you check out the updated version of the 7500 - the CAME-7800. The CAME-7800 is  based on the original CAME-7500, but it's completely upgraded and pre-assembled. The 7800 has upgraded; handles, quick release plate and is tool-less on the roll and YAW axis.

CAME-7500 Gimbal
CAME-7500 3-Axis Gimbal

CAME-7800 Gimbal
CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800  or any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

came-7800

Brandon Lane, uploaded this test video that is mainly focused on how the Sony A7Sii Slog2 performs. In the video he decided to try it out by following his dogs with the CAME-Mini 2 gimbal.
The video is all in slo-mo using a Samyang 35mm Cine T1.5 and a Samyang 14mm T3.1 lens shot at 120fps. Brandon Lane, does state that he shot the whole video with the CAME-Mini 2 set to  mode 1(Follow Mode). The CAME-Mini 2 is a tool-less 3 axis gimbal that is designed for smaller bodied cameras like the Panasonic GH4, BMPCC and/or the Sony A7Sii cameras. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and to also protect the wiring.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

 

TheVideoMode.com, posted a  detailed article about their experiences with the CAME-ACTION gimbal for the GoPro camera. Check out the sample footage they uploaded into the article below.

The article is separated into multiple parts that include: the features, in use and the overall verdict of the CAME-ACTION. The CAME-ACTION is designed for the Hero 3, 3+ and 4 GoPro models, along with some other action cameras that have a similar body type. It's completely tool-less, which make using it a breeze, especially when you are in a rush. The encoders make it extremely stable and increases the battery life of the CAME-ACTION when its in use because it allows the gimbal to run on less power.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

 

There are many solutions available that use a simple counterweight to stabilize the camera whilst you are moving it. However, for the sheer control that it is offered by the Came-Action 3-axis Gimbal it beats all of these device. - TheVideoMode.com

For more information on the CAME-ACTION gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

 

David Oastler, uploaded a video a few weeks ago that went over a majority of the details and specs of the CAME-Single gimbal. Recently, he shared this follow up video with us about using the CAME-Single on multiple wedding gigs he shot.

In the first half of the video, David Oastler gives a quick rundown of his personal experiences using the CAME-Single. In the second half of the video he provides some test footage from different  weddings he shot where he used the CAME-Single to follow the bride and groom walking. The CAME-Single is great for cameras like the Panasonic GH4, Sony A7s/A7rII and/or the Blackmagic Pocket Cinema Camera. If you haven't seen David Oastler's first video, make sure you check it out below! 

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

unnamed-2

We are having a $100 off sales event on several popular items. This is our way of saying thanks to our existing and new customers. We will be frequently updating with new sale items, so stay tuned for these great savings!

unnamed

CAME-TV DSLR Cage With Hand Gripunnamed-1

unnamed
unnamed

unnamed-1

 

 

James Norden, posted this quick test of him using the CAME-Mini 2 gimbal! The video consist of James taking the Mini 2 gimbal out on the street and following someone.
He was able to balance his Sony A7RII with the Voigtländer 21mm f/1.8 lens. James Norden does state that his setup did exceed the max weight the Mini 2 can handle. The CAME-Mini 2 is a tool-less gimbal that provides the shooter with incredibly smooth footage. It's really easy to balance your camera on the gimbal and it only takes four rechargeable 18650 batteries.

"Overall I'm very impressed with the CAME Mini 2 - with the right lighter lens it will produce excellent results." - James Norden

CAME-Mini 2 3-Axis Gimbal

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

 

CAME-Mini2 3-Axis gimbal

unnamed-2

We are having a $100 off sales event on several popular items. This is our way of saying thanks to our existing and new customers. We will be frequently updating with new sale items, so stay tuned for these great savings!

unnamed

unnamedunnamed-1

unnamed
unnamed

unnamed-1

 

 

Recently, Tom Antos, posted this detailed review of the CAME-Single 3-axis gimbal. He does state that he was using a Sony A7s with a big lens that might of exceeded the max payload the CAME-Single can handle, but it still worked well and gave him steady footage. In this video he demos the Single with a Sony NEX-5R.

Tom Antos, goes through great detail on what the CAME-Single comes with and how you would normally setup/balance it. The cool thing about the video is that he actually cuts in some "behind the scenes" footage of a recent shoot he worked on using the CAME-Single. The CAME-Single works great as a portable gimbal that you can easily bring around with you.

CAME-TV Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-axis Gimbal

 

Laurent Briere, shared with us another one of his beautifully shot marathon videos in which he uses the CAME-Single gimbal with his Panasonic GH4.

Laurent Briere, follows hundreds of youths and adults running in this marathon that has been going on for 28 years. The CAME-Single is lightweight enough for the shooter to run side by side with a subject as they run, walk or jog. The brushless motors with encoders make the CAME-Single gimbal extremely stable and efficient.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3-Axis Gimbal

 

With less than a month a way for the long awaited Star Wars movie, check out this CAME-Mini 2 test by Maxime Le Bec!

He follows the BB-8 using a BMPCC with a Zeiss 50mm F1.7 lens balanced on the CAME-Mini 2 gimbal. The video is just under :30 seconds, but it demonstrates how stable the Mini 2 gimbal can be when trying to follow a fast subject. The Mini 2 has a clean and professional appearance by having all the wiring internally, so that it won't get in the way as you shoot. It takes four rechargeable 18650 batteries, which slide into the horizontal cross bar.

CAME-Mini 2 3-Axis Gimbal

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Mini 2 3-axis Gimbal

 

 

Laurent BRIERE, posted this quick video of him filming some of his friends at a skatepark with his Panasonic GH4 and CAME-Single gimbal!
The CAME-Single is great for getting steady footage when you're shooting a scene that requires you to follow a subject that's continuously moving around. Laurent BRIERE, has posted a lot of videos in which he follows athletes as they compete in some form of competition. The CAME-Single is a 3-axis gimbal that's designed for you to use one-handed. The new encoder technology allows the CAME-Single to use less power, but also increase the overall stability.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal