Tag Archives: encoders

•

Last month we released a brand new accessory for the CAME-Single, a wireless joystick that allows you to control its pan & tilt movements remotely. It's definitely been a hit with customers so far. However, whether you are a current CAME-Single owner, or if you're looking to one day get one, it's important for us to point out that not all Singles will be compatible with the wireless remote upgrade.
singlejoystick
So how do you know if your Single is capable of the upgrade? The most important thing to note is that ALL CAME-Singles purchased after November 1, 2015 have been modified to contain a brand new circuit board that allows for connection of the wireless joystick receiver. CAME-Singles purchased before November 2015, will not have the same board, and hence are not capable of the wireless joystick upgrade.

single_joystickboard_split

If you do have a newer generation Single with the modified circuit board, then installation of the wireless remote receiver board is easy! Simply open up the handle, connect the receiver board to its corresponding port, and pair the remote. Full instructions can be found in the video below.

Related Posts:

•

After receiving his CAME-single, Andrew Gerard Media, went out and grabbed some quick test footage with his Sony A7Rii!

The CAME-Single gimbal is perfect for shooters who want a simple system thats easy to balance and provides steady footage. The encoders that are built into the brushless motors allow the CAME-Single to be extremely stable. The max payload that the CAME-Single can handle is about 2.6lbs(1.2kg), which is perfect for mirror-less cameras like the Sony A7S series, Panasonic GH4 and the Blackmagic Pocket Cinema Camera.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With EncodersFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

Youtube user, Slashcam, recently uploaded two quick tests he did with the CAME-Single gimbal! Both videos use the CAME-Single, but with different camera setups. The first video uses a Sony A7SII with a FE 3.5-5.6 / 28-70 OSS lens and the second video uses a Panasonic GH4 with a Lumix G X Vario 12-35mm f/2.8 lens.
Each video uses the CAME-Single in different variations. One video focuses on how it performs while you follow a subject and the other video goes through the joystick movements, pan/tilts and holding the CAME-Single as you ride a bike. The CAME-Single is one of the first commercially available 3-axis 32-bit basecam controlled gimbals to offer brushless motors with Encoders.

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

Introducing the brand new CAME-ARGO gimbal with encoders! The ARGO is a newly designed gimbal that is extremely lightweight, but is able to handle pretty heavy DSLR camera setups.
CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With EncodersThe CAME-ARGO has a pre-calibrated 32-bit Alexmos control board and a max payload of about 3kg (6.6 lbs). The CAME-ARGO comes with a new foldable stand that will make it easier for you to balance and setup the gimbal, especially if you're on the go. As of right now, there is no exact date of when the ARGO will be available to purchase, but it will be soon!

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

 

Related Posts:

•

Check out this video that Darryl Smith posted of him using the CAME-Single with a Panasonic and a Panasonic 8mm f/3.5 ED Fisheye lens!

Although, the video is mostly a test on how the Panasonic GH4 looks when the 4K is down converted to 1080, he does use the CAME-Single gimbal the whole time. The CAME-Single is made to hold camera setups that are no more than 2.6lbs(1.2kg). The encoders that are built into the brushless motors allow the gimbal to be extremely stable and use up less battery than needed. The CAME-Single can operate for up to 20 hours when it's fully charged.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

Filmmaker, Tom Antos, recently used a Sony A7sii balanced on the CAME-Single gimbal to film this entire music video! The video follows singer, Anna Cyzon as she walks around the streets of New York. The CAME-Single is perfect for a project that requires a lot of tracking shots, especially if it takes place in crowded areas.

The CAME-Single is small enough to be carried around, but is also strong enough to handle a max payload of 2.6lbs. Tom Antos, also posted a quick making of the music video, which he uploaded the same time as the music video was released. It goes through the creative process and even shows why he decided to shoot the entire music video with the CAME-Single. Watch the making  below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

, posted this quick test video a few days ago of him trying out the Samsung NX-1 camera paired with the CAME-7500 gimbal.

The CAME-7500 is the older version of what is now the CAME-7800 3-axis gimbal. The 7500 gimbal required users to build the gimbal and  required tools to balance the camera on the carriage. Now, most of the gimbals that we offer are tool-less, pre-built and some even have encoders built into the motor (CAME-Single & CAME-Action). The CAME-7800 is a good gimbal for setups that might be too heavy for the CAME-Mini 2 or the CAME-Single. We have a variety of gimbal models that can hold small action cameras(CAME-Action) or bigger setups like a Blackmagic Cinema Camera(CAME-8000).

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

CAME-7800 3 Axis Camera Gimbal

For more information on any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Mini2

Related Posts:

•

TheVideoMode.com, posted a  detailed article about their experiences with the CAME-ACTION gimbal for the GoPro camera. Check out the sample footage they uploaded into the article below.

The article is separated into multiple parts that include: the features, in use and the overall verdict of the CAME-ACTION. The CAME-ACTION is designed for the Hero 3, 3+ and 4 GoPro models, along with some other action cameras that have a similar body type. It's completely tool-less, which make using it a breeze, especially when you are in a rush. The encoders make it extremely stable and increases the battery life of the CAME-ACTION when its in use because it allows the gimbal to run on less power.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

 

There are many solutions available that use a simple counterweight to stabilize the camera whilst you are moving it. However, for the sheer control that it is offered by the Came-Action 3-axis Gimbal it beats all of these device. - TheVideoMode.com

For more information on the CAME-ACTION gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

 

Related Posts:

•

David Oastler, uploaded a video a few weeks ago that went over a majority of the details and specs of the CAME-Single gimbal. Recently, he shared this follow up video with us about using the CAME-Single on multiple wedding gigs he shot.

In the first half of the video, David Oastler gives a quick rundown of his personal experiences using the CAME-Single. In the second half of the video he provides some test footage from different  weddings he shot where he used the CAME-Single to follow the bride and groom walking. The CAME-Single is great for cameras like the Panasonic GH4, Sony A7s/A7rII and/or the Blackmagic Pocket Cinema Camera. If you haven't seen David Oastler's first video, make sure you check it out below! 

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

Related Posts:

•

Recently, Tom Antos, posted this detailed review of the CAME-Single 3-axis gimbal. He does state that he was using a Sony A7s with a big lens that might of exceeded the max payload the CAME-Single can handle, but it still worked well and gave him steady footage. In this video he demos the Single with a Sony NEX-5R.

Tom Antos, goes through great detail on what the CAME-Single comes with and how you would normally setup/balance it. The cool thing about the video is that he actually cuts in some "behind the scenes" footage of a recent shoot he worked on using the CAME-Single. The CAME-Single works great as a portable gimbal that you can easily bring around with you.

CAME-TV Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-axis Gimbal

 

Related Posts:

•

Laurent Briere, shared with us another one of his beautifully shot marathon videos in which he uses the CAME-Single gimbal with his Panasonic GH4.

Laurent Briere, follows hundreds of youths and adults running in this marathon that has been going on for 28 years. The CAME-Single is lightweight enough for the shooter to run side by side with a subject as they run, walk or jog. The brushless motors with encoders make the CAME-Single gimbal extremely stable and efficient.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3-Axis Gimbal

 

Related Posts:

•

Lucent Productions, posted his second CAME-ACTION gimbal test using his GoPro Hero 4 Black.

Like his last video, Lucent Productions, uses his CAME-ACTION gimbal to follow his kid around as he plays outside. The CAME-ACTION is great for quick and fast-paced shots that require you to follow a subject. The encoders on the CAME-ACTION give the gimbal increased stability, while increasing battery time by using less power. The CAME-ACTION can fit the GoPro Hero 3, 3+ and 4.  If you haven't scene Lucent Productions first test, make sure you check it out below.

For more information on the CAME-ACTION gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ACTION Gimbal for the GoPro Hero 3,3+ and 4

Related Posts:

•

Laurent BRIERE, posted this quick video of him filming some of his friends at a skatepark with his Panasonic GH4 and CAME-Single gimbal!
The CAME-Single is great for getting steady footage when you're shooting a scene that requires you to follow a subject that's continuously moving around. Laurent BRIERE, has posted a lot of videos in which he follows athletes as they compete in some form of competition. The CAME-Single is a 3-axis gimbal that's designed for you to use one-handed. The new encoder technology allows the CAME-Single to use less power, but also increase the overall stability.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

 

Related Posts:

•

Recently, Dieter Knüttel, finished his five part review on the CAME-Single gimbal and now he just posted his review on the new CAME-ACTION gimbal for the GoPro.
Dieter Knüttel, goes through all the specs for the CAME-ACTION including the different modes and everything that comes in the box. The last few minutes of the video show a bunch of test footage he shot using the CAME-ACTION. The CAME-ACTION is able to work with the GoPro Hero 4, 3 and 3+.

CAME-ACTION Gimbal for the GoPro

For more information on the CAME-ACTION gimbal for the GoPro click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ACTION Gimbal for the GoPro

Related Posts:

•

Lucent Productions, was able to take the CAME-ACTION gimbal out to the park with his kid and  grab some quick test footage with his GoPro.

The CAME-ACTION is made for shooters who want to get some stable action shots with their GoPro camera. It runs on three rechargeable 16340 batteries , which are small, lightweight and portable. It's made of aluminum alloy and weighs in at 0.66 pounds without the camera and batteries. Since, we introduced the CAME-Single with new encoder technology, the CAME-ACTION also uses brushless motors with encoders, which will decrease the power consumption and increase the overall stability.

came-action gimbal for gopro

For more information on the CAME-ACTION gimbal for the GoPro click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ACTION gimbal for the GoPro Camera

 

Related Posts: