Tag Archives: basecam

Andrew Gerard, recently posted this fight scene called "Two Faced", which he shot with the CAME-Single and Sony A7Rii camera with a Fe 28mm F2 lens. The short film follows two guys as they duke it out in a boxing gym.

The CAME-Single was used the whole time for the short and he shot all of it in one day. The CAME-Single has encoders built into the brushless motors allowing the gimbal to have an incredible amount of stability. A 1/4-20" and a 3/8" are located underneath the handle for mounting the CAME-Single to a tripod/monopod or to a jib. The CAME-Single comes with a hard case for easy packing and portability.

  CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

  CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

, recently posted his second test of the CAME-Single paired with his Sony A7Sii! The video clocks in at about a minute, but it's filled with great shots that show the stability of the CAME-Single. No post stabilization was added.

The CAME-Single is designed to be lightweight, portable and easy to use with just one hand. It has a max payload of about 2.6lbs, making it perfect for cameras like the Sony A7S series, Panasonic GH4, BMPCC, etc. If you want to see Pano Verino's first test, check it out below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

Pano Verino, uploaded his first test with his Sony A7Smk2 balanced  with the CAME-Single gimbal! He does state that there was No Post Stabilization added in post, but the Sony's in camera image stabilization is turned on.

The video is short and mainly focuses on how his setup handles while running and walking. The CAME-Single is one of the first commercially available 3 Axis 32 bit basecam controlled gimbals to offer brushless motors with Encoders. Encoders are often used in Robotics for highly accurate monitoring of the motors position. The design of the CAME-Single is made for shooters to operate the gimbal with just one hand and a 1/4 and 3/8 thread is located under the handle for mounting options.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CameTVSingle

Mesh Frequency, uploaded this quick field test he did with his new CAME-Single gimbal!

Mesh Frequency, states that the main purpose of this video was to see how the CAME-Single handles when following a subject. He also mention how cold and windy it was while filming this field test.

It was cold and windy but it took only 5 minutes to set up the gimbal. I messed up the focus in few places but my main goal was to follow the subject. Unlike what few reviews on line said the whole thing fit in my bag. Over all I am very happy with the tool.

The CAME-Single offers full 3-axis stabilization with a built in joystick and brushless motors with encoders. It's extremely easy to balance with it's tool-less design and portable body, making it easy to take with you for shoots. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours. 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

unnamed

The CAME-Single Wireless Remote is super convenient when you want to remotely control Pan and Tilt on (some) CAME-SINGLE Gimbals. The remote feature works well with a second operator controlling the camera’s movements as the first operator moves around the set. Achieve perfect framing and complete more complex camera movements by working with Dual Operators. If you have your gimbal mounted to the end of a long Crane or Jib you can control easily control the camera with this remote. The system connects via Bluetooth up to 30 feet away. (Range will vary depending on Line of Sight and environmental interference.)

Note: This module is only compatible with Came Single Gimbals purchased after Nov 1st 2015.

SUPER CONVENIENT WHEN YOU WANT TO
REMOTELY CONTROL PAN AND TILT

 

unnamed-1unnamed-3

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 unnamed-4
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-ARGO
Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new CAME-ARGO features 32 Bit Boards with brushless motors and Encoders....
read more read more read more

After receiving his CAME-singleAndrew Gerard Media, went out and grabbed some quick test footage with his Sony A7Rii!

The CAME-Single gimbal is perfect for shooters who want a simple system thats easy to balance and provides steady footage. The encoders that are built into the brushless motors allow the CAME-Single to be extremely stable. The max payload that the CAME-Single can handle is about 2.6lbs(1.2kg), which is perfect for mirror-less cameras like the Sony A7S series, Panasonic GH4 and the Blackmagic Pocket Cinema Camera.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With EncodersFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Youtube user, Slashcam, recently uploaded two quick tests he did with the CAME-Single gimbal! Both videos use the CAME-Single, but with different camera setups. The first video uses a Sony A7SII with a FE 3.5-5.6 / 28-70 OSS lens and the second video uses a Panasonic GH4 with a Lumix G X Vario 12-35mm f/2.8 lens.
Each video uses the CAME-Single in different variations. One video focuses on how it performs while you follow a subject and the other video goes through the joystick movements, pan/tilts and holding the CAME-Single as you ride a bike. The CAME-Single is one of the first commercially available 3-axis 32-bit basecam controlled gimbals to offer brushless motors with Encoders.

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Check out this video that Darryl Smith posted of him using the CAME-Single with a Panasonic and a Panasonic 8mm f/3.5 ED Fisheye lens!

Although, the video is mostly a test on how the Panasonic GH4 looks when the 4K is down converted to 1080, he does use the CAME-Single gimbal the whole time. The CAME-Single is made to hold camera setups that are no more than 2.6lbs(1.2kg). The encoders that are built into the brushless motors allow the gimbal to be extremely stable and use up less battery than needed. The CAME-Single can operate for up to 20 hours when it's fully charged.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

, posted this quick test video a few days ago of him trying out the Samsung NX-1 camera paired with the CAME-7500 gimbal.

The CAME-7500 is the older version of what is now the CAME-7800 3-axis gimbal. The 7500 gimbal required users to build the gimbal and  required tools to balance the camera on the carriage. Now, most of the gimbals that we offer are tool-less, pre-built and some even have encoders built into the motor (CAME-Single & CAME-Action). The CAME-7800 is a good gimbal for setups that might be too heavy for the CAME-Mini 2 or the CAME-Single. We have a variety of gimbal models that can hold small action cameras(CAME-Action) or bigger setups like a Blackmagic Cinema Camera(CAME-8000).

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

CAME-7800 3 Axis Camera Gimbal

For more information on any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Mini2

David Oastler, uploaded a video a few weeks ago that went over a majority of the details and specs of the CAME-Single gimbal. Recently, he shared this follow up video with us about using the CAME-Single on multiple wedding gigs he shot.

In the first half of the video, David Oastler gives a quick rundown of his personal experiences using the CAME-Single. In the second half of the video he provides some test footage from different  weddings he shot where he used the CAME-Single to follow the bride and groom walking. The CAME-Single is great for cameras like the Panasonic GH4, Sony A7s/A7rII and/or the Blackmagic Pocket Cinema Camera. If you haven't seen David Oastler's first video, make sure you check it out below! 

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

Recently, Tom Antos, posted this detailed review of the CAME-Single 3-axis gimbal. He does state that he was using a Sony A7s with a big lens that might of exceeded the max payload the CAME-Single can handle, but it still worked well and gave him steady footage. In this video he demos the Single with a Sony NEX-5R.

Tom Antos, goes through great detail on what the CAME-Single comes with and how you would normally setup/balance it. The cool thing about the video is that he actually cuts in some "behind the scenes" footage of a recent shoot he worked on using the CAME-Single. The CAME-Single works great as a portable gimbal that you can easily bring around with you.

CAME-TV Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-axis Gimbal

 

Laurent Briere, shared with us another one of his beautifully shot marathon videos in which he uses the CAME-Single gimbal with his Panasonic GH4.

Laurent Briere, follows hundreds of youths and adults running in this marathon that has been going on for 28 years. The CAME-Single is lightweight enough for the shooter to run side by side with a subject as they run, walk or jog. The brushless motors with encoders make the CAME-Single gimbal extremely stable and efficient.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3-Axis Gimbal

 

Laurent BRIERE, posted this quick video of him filming some of his friends at a skatepark with his Panasonic GH4 and CAME-Single gimbal!
The CAME-Single is great for getting steady footage when you're shooting a scene that requires you to follow a subject that's continuously moving around. Laurent BRIERE, has posted a lot of videos in which he follows athletes as they compete in some form of competition. The CAME-Single is a 3-axis gimbal that's designed for you to use one-handed. The new encoder technology allows the CAME-Single to use less power, but also increase the overall stability.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

 

David Oastler, posted this detailed review of the CAME-Single 3-axis gimbal. He goes through the balancing process with his Sony A7s and toward the end of the video he shows some test footage that he captured while using the gimbal. (NOTE: David Oastler, does state that there was an audio problem with his mic).

The CAME-Single is a tool-less designed gimbal that is made for one-handed operation. The built in joystick allows you to pan and tilt your camera depending on your shot. To turn on the CAME-Single, you press and hold the button located on the side of the handle. To switch between the three different operating modes, you simple click the same button until the mode  you want is selected.

CAME-Single 3-axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

Ken Lauguico, posted this video that highlights a wedding he shot using the CAME-7500 and CAME-Single 3-axis gimbals. He used two different DSLR cameras, the Canon 6D and the Canon 5Dmkii.
The video has a ton of great tracking shots that follow the bride and the groom as they both get ready for the ceremony. The CAME-Single is  a great one handed gimbal that provides extremely steady footage because of the brushless motors with the new encoder technology. The CAME-Single is great for cameras like the Sony A7sii, Panasonic GH4 or the BMPCC.

CAME-TV Single 3-axis GimbalAlthough, the CAME-7500 is no longer available, the CAME-7800 is an upgraded version of the 7500 gimbal and is tool-less.  For more information on the CAME-Single or the CAME-7800 click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbalCAME-TV 7800 3-axis gimbal