Tag Archives: came gimbal

•

Recently, Dieter Knüttel, finished his five part review on the CAME-Single gimbal and now he just posted his review on the new CAME-ACTION gimbal for the GoPro.
Dieter Knüttel, goes through all the specs for the CAME-ACTION including the different modes and everything that comes in the box. The last few minutes of the video show a bunch of test footage he shot using the CAME-ACTION. The CAME-ACTION is able to work with the GoPro Hero 4, 3 and 3+.

CAME-ACTION Gimbal for the GoPro

For more information on the CAME-ACTION gimbal for the GoPro click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ACTION Gimbal for the GoPro

Related Posts:

•

Lucent Productions, was able to take the CAME-ACTION gimbal out to the park with his kid and  grab some quick test footage with his GoPro.

The CAME-ACTION is made for shooters who want to get some stable action shots with their GoPro camera. It runs on three rechargeable 16340 batteries , which are small, lightweight and portable. It's made of aluminum alloy and weighs in at 0.66 pounds without the camera and batteries. Since, we introduced the CAME-Single with new encoder technology, the CAME-ACTION also uses brushless motors with encoders, which will decrease the power consumption and increase the overall stability.

came-action gimbal for gopro

For more information on the CAME-ACTION gimbal for the GoPro click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ACTION gimbal for the GoPro Camera

 

Related Posts:

•

David Oastler, posted this detailed review of the CAME-Single 3-axis gimbal. He goes through the balancing process with his Sony A7s and toward the end of the video he shows some test footage that he captured while using the gimbal. (NOTE: David Oastler, does state that there was an audio problem with his mic).

The CAME-Single is a tool-less designed gimbal that is made for one-handed operation. The built in joystick allows you to pan and tilt your camera depending on your shot. To turn on the CAME-Single, you press and hold the button located on the side of the handle. To switch between the three different operating modes, you simple click the same button until the mode  you want is selected.

CAME-Single 3-axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

Related Posts:

•

Tempo Media UK, went out with his Panasonic GH4 and CAME-7800 and shot this video that showcases BMX rider, Jay Cowley.

The video shows how the CAME-7800 gimbal can be a good piece of equipment to have for shooting action sports like BMX, skateboarding, rollerblading, etc. The CAME-7800 is a great gimbal for DSLR cameras like the Canon 5Dmkiii or mkii but can also work with smaller cameras like a Panasonic GH4 or Sony A7s.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV 7800 3-Axis Gimbal

 

Related Posts:

•

Ken Lauguico, posted this video that highlights a wedding he shot using the CAME-7500 and CAME-Single 3-axis gimbals. He used two different DSLR cameras, the Canon 6D and the Canon 5Dmkii.
The video has a ton of great tracking shots that follow the bride and the groom as they both get ready for the ceremony. The CAME-Single is  a great one handed gimbal that provides extremely steady footage because of the brushless motors with the new encoder technology. The CAME-Single is great for cameras like the Sony A7sii, Panasonic GH4 or the BMPCC.

CAME-TV Single 3-axis GimbalAlthough, the CAME-7500 is no longer available, the CAME-7800 is an upgraded version of the 7500 gimbal and is tool-less.  For more information on the CAME-Single or the CAME-7800 click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbalCAME-TV 7800 3-axis gimbal

Related Posts:

•

unnamed

SHARE YOUR IMAGES/VIDEOS ON INSTAGRAM WITH #CAMETV AND YOU MAY BE FEATURED HERE OR ON OUR SITE

 

Leopold Hotz

unnamed-1

Leopold Hotz, went out with his CAME-Mini 2 gimbal and filmed an extremely talented bike rider...Read More>>

Dieter Knuttel

unnamed-2

In his fifth and final part of his CAME-Single review, Dieter Knuttel, talks about his overall experience and adds more test footage of him using the CAME-Single gimbal!...Read More>>

Laurent Briere

unnamed-3

Laurent Briere, used a Panasonic GH4 balanced on a CAME-Single to capture this special event called the "Team ASICS Trail". He was able to capture some amazing shots as he ran next to some of the runners....Read More>>

MrCheesyCam

unnamed-4

MrCheesyCam, uploaded this detailed review of the new CAME-Action gimbal for the GoPro. He goes through all the main specs and even includes some test footage at the end of the video!...Read More>>

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 mini2
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-MINI 2 Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new MINI2 is completely tool-less which allows the operator to change camera setups....
read more read more read more

Related Posts:

•

Here's a quick informative video on how to check the voltage on your gimbal batteries!

If you happen to have a multi-tester laying around, it would be a good idea to check the batteries you have for your gimbal. You want to make sure your batteries are fully charged before testing the voltage.

Screen Shot 2015-10-30 at 11.10.29 AM

The 18650 batteries for the CAME-TV Mini/Mini 2 and the 16340 batteries for the CAME-ACTION gimbal should be reading at 3.7v or higher. The 3S Lipo Battery for the CAME-7800 and 8000 should be giving you a reading of 11v or higher.

For more information on the products mentioned above click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Mini 2 3-axis gimbalCAME-ACTION Gimbal For The GoProcame-7800 3-axis Gimbalcame-8000 3-axis Gimbal

Related Posts:

•

Your card is formatted, talent's in place, and your gimbal is perfectly balanced. And just as you're about to roll camera.... your gimbal's battery dies. But wait? You charged your battery overnight, right? Even so, batteries, just like most things that involve power, have a shelf life.

The best way to avoid this nightmarish scenario is to test your batteries on a regular basis using a voltmeter/multitester. Among the many things it's capable of, a multitester can read the voltage of your battery and let you know if it has enough juice in it to perform. And just as easily, it can let you know if the battery is ready to be replaced.

If you don't own or readily have access to a voltmeter or multitester, then you can bring your battery(ies) into most electronics/repair shops or automotive garages. Most of these businesses will test your batteries for free.

Check multitester prices here.

Related Posts:

•

1080 Digital Media, recently uploaded his second test of him using the CAME-Single gimbal. The majority of his first video was how it performed while walking. 1080 Digital Media, states that the main focus on this video was for driving and "following a person" shots. He used a Panasonic GH3 recording at 50fps, but states that Vimeo re-conformed it to 25P.

This is mainly a test for driving shots and following (a person) shots. These 2 areas are the rig's strong points so far.

Since the CAME-Single has brushless motors with encoders, it has the ability to make your driving shots incredibly smooth and more stable.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single 3-Axis Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbal

 

Related Posts:

•

Recently, Stanly, posted this video of some shots he edited together using his Sony A7s with a Zeiss Loxia 2/50 lens balanced on a CAME-Single.

Even though the video is short, it looks like a very cinematic music video. The beginning shows the main soundcheck, but at the end it transitions directly into the bands live show. The CAME-Single gives the shooter incredibly smooth footage while operating the gimbal with just one hand. The CAME-Single is the first commercially available 3-axis 32-bit basecam controlled gimbal that offers brushless motors with encoders.

CAME-Single 3-axis gimbal

 

For more information on the CAME-Single Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbal

Related Posts:

•

Vimeo user,Laurent BRIERE - BEtrainedProd, shot this special trail event with his Panasonic GH4 balanced on a CAME-Single gimbal. The video is filled with excellent tracking shots as Laurent Briere follows the runners as they reach the finish line.

The CAME-Single is designed for one handed operation and gives the shooter amazing stability with the new encoder technology thats built into the motors.The 3-axis CAME-Single has a new updated internal battery, which allows the gimbal to operate up to 20 hours on a single charge.

CAME-Single 3-Axis Gimbal For more information on the CAME-Single 3-axis gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

Related Posts:

•

jpeg

Full HD LCD Screen
1080p H.264 Video Codec. MOV video format 960x 240 , 2 inch TFT
Sensor Lens
16MP Full HD CMOS 166° 7G Full Glass wide angle


THE NEW CAME-ZERO IS YOUR PERFECT PARTNER FOR CAPTURING THOSE RADICAL MOMENTS

edge

FROM OUR BLOG

unnamed

Cinema5D: Testing the New Sony A7sII using the CAME-Single

Johnnie Behiri from Cinema5D.com recently posted his first impressions and footage of the Sony A7s II. Johnnie Behiri is a BBC freelance cameraman/editor who also films documentaries, commercials, music videos and many other projects.

In the video above, Johnnie, states that he was trying to squeeze “normal footage”, “lowlight” and “slow-motion” parts into one video." In the moving shots Johnnie used our CAME-TV Single Handheld 3-axis gimbal, with the Sony A7sII and Sony 16-35mm lens, which he said was his preferred gimbal...Read More>

unnamed-2

"CAME-TV CAME-Single is currently my preferred gimbal. Very easy to use and adjust."

YOU MIGHT BE INTERESTED IN THESE GIMBALS

CAME-ACTION CAME-Single CAME-Mini2
CAME-ACTION
Tool-less 		CAME-SINGLE
Tool-less		 CAME-MINI 2
Tool-less
The design of the CAME-Action allows for one handed smooth operation........ The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled...... The new MINI2 is completely tool-less which allows the operator to change setups....
read more read more read more

Related Posts:

•

Vimeo user, Dieter Knüttel, has uploaded four detailed videos regarding the CAME-Single gimbal so far and now he uploaded his fifth and final video. He talks about his overall experience using the CAME-Single and talks briefly about balancing it with his Panasonic GH3 mirror-less camera and Lumix 12-35mm lens.

CAME-Single Review With Dieter Knuttel

In this video, he jam packed even more test footage of him using the CAME-Single! It's great to see customers going out on the field and gathering a ton of footage with the CAME-Single. Dieter does state in the description "Any stutter you might see does not come from the gimbal but is a 25p on a 30p timeline problem".

For more information on the CAME-Single 3-Axis Gimbal click below!

CAME-Single 3-Axis Gimbal

Related Posts:

•

Johnnie Behiri from Cinema5D.com recently posted his first impressions and footage of the Sony A7s II. Johnnie Behiri is a BBC freelance cameraman/editor who also films documentaries, commercials, music videos and many other projects.

In the video above, Johnnie, states that he was trying to squeeze “normal footage”, “lowlight” and “slow-motion” parts into one video." In the moving shots Johnnie used our CAME-TV Single Handheld 3-axis gimbal, with the Sony A7sII and Sony 16-35mm lens, which he said was his preferred gimbal.

"CAME-TV CAME-Single is currently my preferred gimbal. Very easy to use and adjust."

We were honored to find out that he was using our CAME-Single gimbal while testing out the new Sony A7sII with great results.

DSC04384-640x360

In the article, Johnnie explains the main advantages of the Sony a7SII from the original a7s:

    • "Internal UHD 4K recording
    • S-log 3 (in addition to S-log 2)
    • Gamma Display Assistant (allows you to monitor your flat S-log 2 or 3 image in a more vivid Rec 709 way)
    • Internal IBIS stabilisation system (5-Axis SteadyShot)
    • A possibility to charge the camera via the USB port
    • A possibility to assign “REC” to other buttons than the awkwardly placed rec button
    • 100fps (PAL), 120fps (NTSC) in HD quality"

He also explains his most noticeable differences from comparing the Sony a7S II to the a7R II:

  • "The addition of S-log 3
  • Up to 120fps in full HD (compared to 60fps)
  • Gamma Display Assist
  • Sony’s a7S II is cleaner in low-light situations compared to the a7R II
  • Because of its higher pixel count, the Sony a7R II can shoot in APS-C S35 crop-mode in 4K. The a7S II can not do that. Further more, any APS-C lens that will be attached to this camera will have strong vignetting at the edges in 4K-mode (APS-C mode is limited to HD resolutions)."

For the full article, make sure to check out Cinema5D.com for Johnnie's full impression of the Sony A7s II or CLICK HERE

For more information on the CAME-Single Gimbal click below!

CAME-TV CAME-Single 3-Axis Gimbal

Related Posts:

•

, posted this wedding video he shot using the CAME-7800 3-axis gimbal with a Canon 5DmkII + 17-40mm lens! The video shows a lot of great tracking shots of the bride and groom walking through some beautiful outdoor locations.
The CAME-7800 can support setups up to 6.5 pounds, which is perfect for cameras like a Canon 5DmkIII, Canon 7D or even a Panasonic GH4. The CAME-7800 offers multiple modes that you can cycle through by clicking the joystick. The updated version of the 7800 Gimbal has new quick release knobs that make it easier to balance on the roll and yaw axis.

CAME-7800 3-Axis Gimbal(monitor and camera not included)

For more information on the CAME-7800 3-Axis Gimbal click below!

CAME-7800 3-Axis Gimbal

Related Posts: