Tag Archives: argo gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Owners of our CAME-Argo and Mini 3 might have noticed something different in each gimbal's battery configuration. We are now using a battery case that has 18650 LiPo batteries allowing you to remove them, charge them and immediately replace them with a backup set of fully charged 18650 LiPo batteries that you might have on standby. This allows you to keep cycling through numerous sets of batteries for an extended gimbal run time.

As with all LiPo batteries it is never good to over-discharge the battery. Over-discharge is when a battery cell voltage drops below the level of circuit protection limit. Once a LiPo battery is over-discharged, it is more than likely that it cannot be recharged and new one would have to be purchased.

We strongly recommend that when the gimbal is not in use or is in storage, to remove the 18650 LiPo batteries from the battery case. Failure to do so can result in over-discharge of the battery/batteries.

YouTube Reviewer MrCheesycam gives us a thorough breakdown of the updated battery packs in the video below:

facebooktwitterpinterestfacebooktwitterpinterest

@rlcreativevisuals' new #cametv #argo #gimbal setup with his #Sony #A7s! #CameGimbal #ArgoGimbal #Camegimbalsnap5 #argosnap3 #CameArgo #SonyA7s #CametvArgo - Level up :) #cametv #cameargo #Regrann via Instagram https://www.instagram.com/p/BJLwpL1BmeG/

facebooktwitterpinterestfacebooktwitterpinterest

Tom Antos, recently uploaded this detailed review on our CAME-ARGO Gimbal! Along with his overall impressions of the ARGO, he added some example footage he shot with the Canon 7D.

The CAME-ARGO features a 32-bit Alexmos Board and is completely tool-less for easy balancing. All of the motors are equipped with encoders, making the performance more smooth and accurate. The handle comes with a monitor mount and a wireless remote, which allows you to remotely control the gimbal and switch between modes. The entire top handle bar can be easily separated from the gimbal, allowing the ARGO to be mounted to other devices like a crane, slider or drone with the included adapter plate.

CAME-TV ARGO 3-Axis Gimbal

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Can't wait to see some of the test footage that @tom_antos filmed with our #cametv #argo #gimbal! #CameArgo #CameGimbal #argosnap3 - Argo camera gimbal from @cametv is next up for testing #Regrann via Instagram https://www.instagram.com/p/BHky7mLhYFg/

facebooktwitterpinterestfacebooktwitterpinterest

CREATIVE Team, recently uploaded their second test video on the CAME-TV ARGO gimbal! The video was shot with the Canon 5DmkIII with three different lenses; the Canon 24-105mm, 50mm and 18-200mm!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. All of the motors are equipped with encoders, which makes the ARGO's performance more smooth and accurate, along with increasing the lifespan of the battery.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

facebooktwitterpinterestfacebooktwitterpinterest

BTS shot of @gabortokodidotcom filming with his #cametv #argo #gimbal & #Sony #a7sii! #CameArgo #CameGimbal #SonyA7s2 - www.gabortokodi.com
#sony #sonya7s2 #sonya7sii #sonya7sm2 #cametv #Regrann via Instagram https://www.instagram.com/p/BHLAu-ihlaM/

facebooktwitterpinterestfacebooktwitterpinterest

@nastaydrek just received his brand new #cametv #argo #gimbal! Thanks for the support! #CameGimbal #CameArgo #argosnap3 - Just received my new #cametv Argo 3 axis gimbal!! - let's go film #production #innovativemotion #cametvargo #gimbal #Regrann via Instagram https://www.instagram.com/p/BHBNuXzB732/

facebooktwitterpinterestfacebooktwitterpinterest

@joswin's #cametv #argo #gimbal setup with his #Sony #A7s! #CameGimbal #CameArgo #SonyA7s •••
Just got this baby in the mail. Can't wait to film some dope stuff with it! 💪🏼 via Instagram https://www.instagram.com/p/BG7lfPEB1sQ/

facebooktwitterpinterestfacebooktwitterpinterest

Youtube user, StabilizerNews uploaded this short film that follows a mountain biker as he goes for a ride through the woods. Except for the drone shots, the short was filmed mostly with the CAME-TV ARGO gimbal! He used the Canon 5DmkIII with two different lenses - the Canon 16-35mm & the Rokinon 35mm.
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less. All of the motors are equipped with encoders, making the performance much more smooth and accurate while also increasing the lifespan of the battery. On the bottom of the ARGO's frame,  there's a video transmitter along with a D-Tap out, which you can power an accessory like a wireless follow focus.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

facebooktwitterpinterestfacebooktwitterpinterest

BTS of a shot using the #cametv #argo #gimbal that required some teamwork! Pic by @gabortokodidotcom #sony #a7sii #SonyA7sii ・・・
like in the eurovision bts.
www.gabortokodi.com
#sony #sonya7s2 #sonya7sii #sonya7sm2 #cametv #eurovision #gimbal via Instagram https://www.instagram.com/p/BGF7O_xB1sq/

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, BlackStunt Prod uploaded his latest demo reel that showcases a bunch of his most recent work. Most of the tracking shots that are in the demo reel were shot with the CAME-TV ARGO Gimbal!

BlackStunt Prod, filmed his projects with the Canon 70D with multiple lenses: the Canon 10-22mm, Canon 50mm f1.8 and a the Canon 24-70mm f2.8. He does mention that he also used a handheld stabilizer for some of the other shots. The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which increases the overall performance of the ARGO and makes the battery last a lot longer.CAME-TV ARGO 3-Axis Gimbal

The entire top handle bar can easily be separated from the gimbal, which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Customers of our newer gimbals may have noticed that the battery charger kits for the CAME-Argo and Mini 3 are slightly different from how they used to be. With this slight change, there is an updated process on how to properly charge your batteries for these gimbals. See the video below for a simple step-by-step breakdown.

The blue LED indicator lights on the battery itself will not blink as it is charging. However, you can press the button to see the progress of the charge.

facebooktwitterpinterestfacebooktwitterpinterest

HDVideoshop Berlin, uploaded this quick overview video of our CAME-TV ARGO Gimbal. The video shows the quick balancing process and also includes some sample footage. They used the ARGO with the Sony A7S camera.

The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which makes the performance much more smooth and accurate - also, increasing the lifespan of the battery. On the bottom of the ARGO there's a video transmitter along with a D-Tap out, which can power accessories like a wireless follow focus.
CAME-TV ARGO Gimbal

 

 

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Youtube user, TheAwesomeSam, uploaded this video of how he put together a DIY support backpack for his CAME-ARGO 3-axis gimbal!

With just a few simple items he bought buy online or at a hardware store, TheAwesomeSam was able to build a backpack that hooks onto the handles of his ARGO. A support backpack is known to relieve some of the stress in your arms while holding the gimbal for long periods of time.DIY Support Backpack

The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less. All of the motors are equipped with encoders, which make the ARGO's performance much more smooth and accurate, while also increasing the lifespan of the battery. The CAME-ARGO comes with a monitor mount and a wireless remote, allowing you to control the gimbal remotely and switch between modes.

CAME-TV ARGO 3-Axis Gimbal

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

@gabortokodidotcom doing some outdoor shooting with his #cametv #argo #gimbal and #Canon #5dmarkiii!
・・・
www.gabortokodi.com
#cametv #canon #canon5dmarkiii #canon6d via Instagram http://ift.tt/1N3Woch